C24 CARCASSING

C24 CARCASSING

Known for its high strength, stiffness, and stability. Often used in structural, construction components such as beams, joists, rafters, and studs, where a higher load-bearing capacity is required. This grade of timber is typically made from slow-grown softwoods, such as spruce or pine, which offer improved structural properties.

We also stock a range of CLS, Type A Battens and Sawn Treated Boards which can be supplied as part of a mixed load.

  • Dual stock of Treated & Untreated
  • Full loads delivered nationwide
  • ‘Pick a pack’ service, mix with other products
  • Up to 7.2m lengths available
  • Stocks held at Shoreham and Cardiff
  • Small (half) pack sizes

Details

Grade :

C24 ONLY (BS EN14081 and BS EN385)

Kiln :

Kiln Dried / HT56°/30 / ISPM15

Finish :

Planed & Regularised All Round with Eased Edges

CoC :

Yes

Species :

Whitewood / Spruce / Picea Abies
Redwood / Pine / Pinus Sylvestris

Pack Size :

Half Size Packs

Treatment :

High Pressure UC 2 (BS8417)

Packaging :

5 Side Wrapped

Long Lengths :

6.6m / 7.2m Solid (not fingerjointed)

C24 Carcassing

C24 ONLY | PAR | Kiln Dried HT56/30 | Eased Edge | Half Packs | Swedish | 100% PEFC Certified

C24

Nominal Actual Pieces 2.4 3.0 3.6 4.2 4.8 5.4 6.0 6.6 7.2
38 x 50 35 x 45 330
47 x 50 45 x 45 264
47 x 75 45 x 70 168
47 x 100 45 x 95 132
47 x 125 45 x 120 108
47 x 150 45 x 145 84
47 x 175 45 x 170 72
47 x 200 45 x 195 60
47 x 250 45 x 220 60
47 x 250 47 x 245 48
75 x 100 72 x 95 77
75 x 150 72 x 145 49
75 x 175 72 x 170 42
75 x 200 70 x 195 35
75 x 225 70 x 220 35
100 x 100 95 x 95 33

We are a service led company and welcome your enquiries for a professional approach to your quality timber sourcing and sales

Send An Enquiry